The Interceptor Pro of Xilence is original, including Mount mini-ITX and configuration HPTX configuration.
It often scoffs the lack of originality of the manufacturers of STBs, at the time German Xilence has decided to develop a completely different model of what one can see usual. His Pro Interceptor incorporates indeed a wide location that can host a configuration in the format HPTX (cards-mothers that the ATX, a format invented by EVGA for its bi - CPU cards), but also a second location in the upper compartment can accommodate a mini-ITX configuration.
Where a single configuration is installed, this space can be used to add 2 bays 5.25 "and 4 bays including 2 hot-swap 3.5". In addition, it can receive 4 120 mm and up to 2 230 mm fans, fans, or one to two massive water cooling radiators.
To the top, can be thus mount configuration bi - GPU allowing a quad SLI/CrossFireX, with above a small mini-ITX configuration. The big play, small for surfing, for example. Damage to €299, the Interceptor Pro integrates not a KVM switch to pursue his idea and allow to control the two config' with a single keyboard-mouse kit.
The Pegasus R4 of Promise was presented at the presentation of the Thunderbolt by Apple last February. Promise was one of the first to have announced support this format (see "Thunderbolt: hard disks to the Nikon reflex") and it has recently shown a functional model for the last Taiwanese salon (cf. "Thunderbolt shows at the Computex"). The performance of the R4 are still unknown. The version presented on the site of Apple is that integrating hard drives. The price of the model comes with an Intel SSD was not available on the site. It will also highlight Thunderbolt devices output seems to be falling behind. They were originally announced for the second quarter of this year, but they should not go out before July.
The TowerRAID TR4UT-B is a 4-bay RAID enclosure that utilizes the widely available USB 2.0 and performance orientated eSATA to provide over 200MB/s in performance. With built-in support for RAID 0, 1, 10, 3, 5 with hot-spare support and JBOD, the TR4UT-B provides hardware RAID redundancy protection against hard drive failures. A brand new RAID mode, CLONE or N-Way Mirror, is introduced to replicate the saved data throughout each installed hard drive. The RAID engine is embedded within the enclosure, where all RAID parity calculation will be offload to the unit, instead of the controller card or computer, to achieve high performance. The unit's hardware RAID capability also helps to eliminate OS compatibility issues where installation software is unnecessary. To satisfy the need for performance hungry applications, each unit is bundled with a 2-port PCIe 2.0 x1 eSATA controller card with SATA 6.0 Gbps (6G) support (Highpoint Tech R622 Controller card). PCIe 2.0 provides twice the bandwidth of PCIe 1.0 unit, allowing over 200MB/s in performance. The unit is backward compatibility with PCIe 1.0 slots, to provide eSATA connectivity without eSATA built-in. Designed with easy installation in mind, the trayless TR4UT-B allows effortless installation by simply inserting the hard drive after opening the protective ventilating cover.
The TowerSTOR TS25CT is a hardware RAID 5 five 2.5" hard drives bay enclosure that utilizes the widely available USB 2.0, Firewire 800 and performance orientated eSATA to provide over 200MB/s performance. Built-in support for RAID 0, 1, 10, 3, 5 with hot-spare support and JBOD, TS25CT provides hardware RAID redundancy protection against hard drive failure. A new RAID mode, CLONE mode or N-Way Mirror is also introduced to support same copy of the data in all of the hard drives installed. Since RAID engine is embedded in the enclosure, RAID algorithm calculation is offload to the storage unit instead of the host computer to provide optimum performance. Hardware RAID enclosure also prevents OS compatibility issues as it does not require software driver software Firewire 800, USB 2.0 and eSATA provide versatible host interface combinations for both PC and MAC. TS25CT is the ultimate RAID 5 storage for all of your storage need. Hardware RAID, supporting RAID 0, 1, 10, 3, 5, JBOD, Clone and hot spare disk. Over 200MB/s read and 170MB/s write performance. Firewire 800, eSATA and USB 2.0 interface. True hardware RAID design within the enclosure, no driver and no additional RAID controller needed. New Clone mode (N-way Mirror) all the hard drives connected will be mirrored. Clone mode is especially useful when users would like to copy data form a hard drive to several hard drives simultaneously. Supports SATA I (1.5Gb/s) and SATA II (3Gb/s) hard drives. Over 2TB per volume via eSATA and USB on OS that support 2TB and above. Automatic insertion/removal detection and rebuild. Hardware RAID with standard Interface. No extra drivers required. Includes five hot-swappable hard drive trays for easy hard disk replacement. Compact, stylish 5 bay tower design with protective ventilating front cover.
The TowerSTOR TS25CT is a hardware RAID 5 five 2.5" hard drives bay enclosure that utilizes the widely available USB 2.0, Firewire 800 and performance orientated eSATA to provide over 200MB/s performance. Built-in support for RAID 0, 1, 10, 3, 5 with hot-spare support and JBOD, TS25CT provides hardware RAID redundancy protection against hard drive failure. A new RAID mode, CLONE mode or N-Way Mirror is also introduced to support same copy of the data in all of the hard drives installed. Since RAID engine is embedded in the enclosure, RAID algorithm calculation is offload to the storage unit instead of the host computer to provide optimum performance. Hardware RAID enclosure also prevents OS compatibility issues as it does not require software driver software Firewire 800, USB 2.0 and eSATA provide versatible host interface combinations for both PC and MAC. TS25CT is the ultimate RAID 5 storage for all of your storage need. Hardware RAID, supporting RAID 0, 1, 10, 3, 5, JBOD, Clone and hot spare disk. Over 200MB/s read and 170MB/s write performance. Firewire 800, eSATA and USB 2.0 interface. True hardware RAID design within the enclosure, no driver and no additional RAID controller needed. New Clone mode (N-way Mirror) all the hard drives connected will be mirrored. Clone mode is especially useful when users would like to copy data form a hard drive to several hard drives simultaneously. Supports SATA I (1.5Gb/s) and SATA II (3Gb/s) hard drives. Over 2TB per volume via eSATA and USB on OS that support 2TB and above. Automatic insertion/removal detection and rebuild. Hardware RAID with standard Interface. No extra drivers required. Includes five hot-swappable hard drive trays for easy hard disk replacement. Compact, stylish 5 bay tower design with protective ventilating front cover.
